Categories
Design & decor

Why you should start using eco-friendly paints for your home

Does wet paint make your head spin? There’s a good reason why. Most paints contain volatile organic compounds (VOCs), which can cause headaches and dizziness. These VOCs in paint and other paint products, such as thinners, also contribute to air pollution

But if VOCs are so bad, why do paints have them at all? The thing is, paint needs VOCs to stay liquid and durable. They also make paint durable enough for high-traffic areas.

Thankfully, science has made it somewhat possible to get new paint jobs done with a lowered risk of harm to one’s health and the planet with eco-friendly paint. Choosing environmentally friendly paint options is an easy way to make your home more sustainable as you integrate it into your renovation projects or even regular home repairs.

What are eco-friendly paints?

Paint cans ready for painting | Source: iStock

Eco-friendly paints are formulated to have little to no VOC content. Unlike traditional paints, which are often oil-based and contain lots of adhesives and chemicals to speed up drying, eco-friendly paints are often water-based. They may contain naturally occurring, biodegradable, and sustainable products like balsam, citrus, and milk proteins.

Eco-friendly house paints should ideally be manufactured sustainably, too. Their material safety data sheet (MSDS) should have a list of the ingredients used so you can check and research the contents and processes.

One thing to note about the “Low VOC” label is that this could be used quite loosely. For example, the base paint may be low in VOCs, but the pigments may contain a high VOC count. So, it’s better to check for third-party certification or approval as well. You can refer to UL Greenguard labels or Green Seal’s standards for VOC content in paint.

Why should you choose eco-friendly paints over traditional paints?

A woman painting the interior walls green | Source: iStock

Using eco-friendly, non-toxic paint has numerous benefits for your home and the environment.

Reduced health risks while painting

You or whoever will be painting will benefit from reduced exposure to VOCs. This means less dizziness and headaches as you paint and less risk of developing respiratory infections. If you often struggle with nausea and shortness of breath with traditional paints, your body will thank you for making the eco-friendly switch.

Improved indoor air quality

Traditional paints tend to off-gas VOCs long after the paint has dried, which means that even after you’ve moved into your new home or finished the paint job, you’ll still inhale those fumes! Eco-friendly paint reduces that risk and improves indoor air quality.

Painting a wall sometime soon? Choosing a good paint is just the start of your renovation journey. 

Lessened environmental impact

Conventional, high-VOC paints emit greenhouse gases that cause global warming. They are also linked to acid rain and urban smog. When disposed of improperly, they can also add to water pollution.

Since most eco-friendly paints are made using sustainable practices and biodegradable materials, their carbon footprint is less than that of other options. Some companies even use recycled tins to package the paint! Also, depending on your chosen brand, some can even be safely composted without harming plants, animals, soil, or water.

Improved durability and cost-efficiency

Today’s eco-friendly paints have improved durability and a long-lasting finish despite having fewer VOCs. This means you can count on a paint job to last longer–more bang for your buck, less paint used over the years, and a minimised carbon footprint.

Support for the local economy

Eco-friendly and sustainable paint companies typically manufacture and sell locally to reduce carbon emissions from transporting products. Supporting local brands matters to the planet and the local businesses you’re supporting!

Common types of eco-friendly paints

There are a few types of eco-friendly paints available now on the market. Just like conventional paints, they come in various colours for you to choose from. Here are just some of the eco-friendly paint options available and what you need to know about them

Milk paint

Milk paint uses a milk protein called casein and lime. It emits zero VOCs and was a popular choice for painting wooden furniture in colonial America. This is a great choice for interior walls and furniture.

Water-based, non-toxic acrylic paint

Acrylic paints are commonly used for artwork but can also be found in hardware shops. Since some acrylics can contain heavy metals like lead and cobalt, check the label to ensure you get a water-based, non-toxic option.

Mineral, chalk, and clay paint

These paint types are made of naturally occurring substances, making them eco-friendly. Minerals are often used for their pigments, while clay is used as a thickener.

Plant-based paint

These eco-friendly wall paints come from plant-based ingredients such as oils or actual crops. Some manufacturers may even use recycled materials for the packaging to lessen the carbon footprint of the overall production.

Low VOC latex paint

Latex paint is generally more eco-friendly than oil-based paint; it’s best to get cans labelled “low VOC” since formulations may differ. You can check the paint’s materials safety data sheet to compare products.

Zinc phosphate-containing paint

Exterior paint tends to contain more chemicals to help the paint stay on despite weathering. But you can opt for eco-friendly options for these projects, too. Zinc phosphate acts as a fungicide and aids adhesion. It’s also a safer alternative to the more common additive, zinc chromate.

With so many eco-friendly wall paint options available, you can freely take your pick and do your research based on what best suits your home.

4 Tips for choosing eco-friendly paints

Couples painting their walls white | Source: iStock

1. Choose the right paints for your project

There are interior and exterior paints and paints with different finishes. With so many formulations for eco-friendly paint, there are dozens of brands and varieties. 

Need help finding the perfect colour and finish for your project? Here are some tips on how to match paint colour.

2. Research your paints and paint companies

Look into the ingredients, the processes, and the company behind them. Refer to the product’s materials safety data sheet and the company website, and don’t be afraid to ask questions. The more transparent the company is about its products, the better.

3. Look for third-party certifications and seals

Examples are those from the EPA, Good Environmental Choice Australia, The Green Building Council of Australia, Green Seal, and UL Greenguard.

4. Consider the packaging and transportation of the paint, as well as its disposal process

You may opt for brands with recycled or easily recyclable packaging. You could go for local shops to reduce the carbon footprint of transport and shipping. Or, you could look into how eco-friendly the paint is based on how it should be disposed of (e.g. can it be composted or thrown in the rubbish safely?). 

Is it better to DIY or hire a professional when painting using eco-friendly paints?

Doing a DIY paint job using eco-friendly paint is not different from using conventional products. 

Each type of eco-friendly paint has its own prep method and tips. For example, milk paint application requires mixing the paint powders and bonding agents. Latex paints are good to use straight out of the can, but good-quality materials can help provide more control and better results.

On the other hand, you get efficiency and expertise when hiring a pro. Seasoned house painters are already familiar with different types of surfaces and paints, including eco-friendly paints and their required primers, thinners, or topcoats. They can also help you make better decisions for your renovation projects, such as colour combinations for your living room, the best paint type for a humid room, and how to maintain the paint job afterwards.

Should you decide to hire a pro painter, you can certainly share all that you’ve learned about eco-friendly and non-toxic paints and discuss your questions and suggestions with them.

Choose eco-friendly paints for your next project

Non-toxic paints make renovating your home with less environmental impact and health risks possible. These are benefits you’ll enjoy not only whilst working on your walls but long after the fresh coat of paint has dried.

Now that you’re familiar with the safe alternatives to traditional options, you can take on your next painting project using eco-friendly paints. Whenever in doubt, you can always reach out to professional painters to help with your renovation projects. 


FAQs on eco-friendly paints

What is the most eco-friendly paint?

While there is no hard and fast rule for the most environmentally friendly paint, water-based, chalk, and milk paints are considered to have less impact than typical oil-based paints. This is because they emit less VOCs and cause less damage to the environment and our health.

Is eco-friendly paint non-toxic?

Yes, eco-friendly paint is non-toxic. They typically contain ingredients such as water, milk proteins, or plant-based pigments. Acrylic paint can also be considered eco-friendly and non-toxic as long as it doesn’t contain metals like lead and cobalt.

Is eco-friendly paint worth it?

When it comes to calculating the cost of paint versus its impact on your health, the environment, and its long-term durability, eco-friendly paint is worth the extra cost. Conventional oil-based, high-VOC paints have been linked to numerous health issues and environmental concerns, making eco-friendly alternatives a worthy investment.

Categories
Construction

The 5 best exterior paint finishes for homes

Giving your home exterior a fresh coat of paint provides many long-lasting benefits. Various exterior paint finish types add durability and aesthetic value to your home. Moreover, they can protect your home from weather damage while giving it a glow or a noticeable shine. 

In addition, the best finish for exterior paint can protect siding and trim and ensure longevity. This article will guide you through the most popular exterior paint finishes for homes to help you make the best choice for your house painting project.

Understanding paint finishes

A paint’s finish refers to its appearance when it has dried on the surface. The kind of exterior paint finish you choose will impact the longevity of your siding, trim, and other exterior surfaces. In addition, the right sheen can instantly boost your kerb appeal.

When painting a wall, it’s more crucial to choose the right exterior paint finish than to select an interior finish. The paint finish must withstand day-to-day atmospheric conditions such as cold and hot weather. Moreover, outside dirt and debris can whittle away at inflexible paint over time. 

Considerations when choosing a paint finish

A painter painting the exterior wall / Source: iStock

Exterior paint finishes vary in the ratio of resins, binders, and pigment levels in the paint. When choosing a paint finish for your home exterior makeover, consider these three factors:

  • Luster: This affects how much light reflects on the painted surface. Finishes with low reflectiveness are suitable for hiding blemishes. Meanwhile, finishes with high lustre are best for illuminating places with little sunlight.
  • Appearance: The appearance of paint varies upon drying and the level of sheen a finish has. Matte paint reduces glare and blends with surroundings due to its low reflectiveness. Glossy paint can bring emphasis to outdoor architectural details.
  • Wear and tear: High-traffic areas such as front doors may require paint with higher durability and sheen. More flexible paint finishes, such as semi-gloss, are resistant to stains and are easily wipeable. Less durable finishes, like eggshells, are better for siding.

Does exterior paint come in different finishes?

Yes, There are five exterior paint sheens typically used in homes. Deciding on the best paint finish for exterior walls can be confusing at first. Here is a simple guide comparing the most popular exterior paint finishes used in today’s homes. Each finish has unique advantages and disadvantages, so take note of the following comparisons in your next home makeover.

Best exterior paint finish types

Flat or Matte 

A professional painter using a paint roller / Source: iStock

If you are looking for the perfect paint finish for retouching your paint exterior, look no further than flat or matte finishes. Its velvety and non-reflective appearance can hide imperfections on older walls. This finish performs best on homes in sunny areas. In addition, flat paint finishes are not advisable on homes in harsh summers and winters due to their low durability.

Best recommended for: Concealing flaws on older wooden siding and trim. 

Advantages:
Fast drying time
Smooth texture
Goes well with contemporary homes
Easy to retouch
Disadvantages:
Tough to clean
Not suitable for extreme weather conditions
Unappealing on homes with no sunlight

Eggshell 

Eggshell paint finishes are one of the most popular choices for exterior home makeovers, thanks to it being within the right balance of flatness and sheen. Eggshell paint gives your home a gentle and pleasant glow. 

In comparison to matte paint, it is more resistant to harsh weather conditions under sunlit exteriors. In addition, eggshell paint lends itself well to outdoor DIY paint applications. 

Best recommended for: Low reflective finishes while also concealing small imperfections.

Advantages:
Subtly enhances trim details
Beginner-friendly application
Creates an inviting appearance on the exterior than flat paints
Disadvantages:

Challenging to touch up
Not as durable compared to gloss finishes

Satin

Painting the walls of a house beige / Source: iStock

If you are looking for a durable finish for your exterior, a satin paint finish is a great choice. Its moisture-resistant and reflective formulation makes it a versatile option for exterior as well as interior painting. 

Satin paint is resistant to dirt, mildew, and peeling. It’s also easy to clean, making maintenance a breeze. For the best results, satin paint must be mixed thoroughly before application to keep the formulation consistent.

Best recommended for: Achieving a balanced, long-lasting sheen on your trim. 

Advantages:
Durable and stain-resistant
Moderate sheen
Works well in hot climates
Disadvantages:

Requires thorough mixing to achieve a professional-looking finish

Semi-gloss

Semi-gloss paint is the way to go if you want to give your home exterior a noticeable shine. This is a good choice for painting over surfaces that may experience significant wear and tear, like trim, shutters, and front doors. The tough and shiny finish that semi-gloss paint has makes it easier to clean than satin or eggshell paint. 

Take note that semi-gloss paints are often oil-based, which may emit harmful volatile organic compounds (VOCs). When using glossy paints, make sure that the surface is prepared well to prevent highlighting any dings or blemishes. 

Best recommended for: High-traffic areas such as garage doors, railings, and window frames.

Advantages:

High weather and moisture resistance
Great for high-traffic areas
Easy to clean
Disadvantages:
Challenging to apply
Makes imperfections more visible
Not suitable for large surfaces like siding
May contain environmentally harmful materials

High-gloss

Painting the garage door grey / Source: iStock

In terms of highlighting architectural details, nothing comes close to the sheen of high gloss paint. This type of sheen offers the greatest durability of all the finishes, making it a great option for emphasising intricate architectural details on your home exterior. 

However, high gloss paint can make a surface look plasticky when applied on a large exterior feature such as siding. Hence, it is typically used only for features such as trim and doors. Also note that richer paint, such as semi-gloss and high gloss paint, can chip away if not applied properly.

Best recommended for: Drawing attention to decorative features and accents.

Advantages:

Maximum durability
Rich colour on exterior details
Easy to maintain
Disadvantages:

Expensive
May highlight blemishes
Gives a plasticky appearance on large surfaces

Start planning for the perfect sheen

Colour is not the only consideration when choosing the perfect paint sheen for your home exterior. The right exterior paint finish can ensure your property is not only visually pleasing but also durable and gleaming just right.

Paint finishes are just as important in ensuring a home makeover that will last for years to come. Consult with a professional painter for your next house painting project for a successful painting job. 


FAQs on exterior paint finishes

Is low sheen or matte better for weatherboards?

Both finishes are good options for weatherboards. Low-sheen finishes such as eggshell paint can add a subtle shine to your weatherboards. This adds a layer of durability against the elements. Eggshell paint is also easier to clean than matte paint. On the other hand, matte paint is easier to apply. It requires fewer coats to paint and dries faster. 

What type of finish is best for exterior paint?

The best sheen for exterior painting depends on your personal preferences and project needs. 

If you live in a climate with harsh weather conditions, durable finishes such as satin or semi-gloss may be the better choice. Meanwhile, low-lustre paints like eggshell or matte are preferred for their ease of use. Semi-gloss or high-gloss finish are great choices if the surface you are painting tends to experience wear and tear. 

You can take your personal preferences and project requirements into account when considering the cost of professional painting.

Should exterior house paint be flat or satin?

Choosing flat or satin paint is a question of appearance and durability. Here’s a quick comparison between the two:

  • Flat paint helps your exterior achieve a more natural look. On the other hand, satin paint leaves an attractive glow on the surface. 
  • Flat paint is easier to apply, while satin paint has better cleanability. 
  • In mild weather conditions, flat paint can be a great option. However, satin paint is a better choice for homes in tougher weather conditions since it is more durable than the former.

Should exterior paint be gloss or satin?

While both are suitable choices for exterior painting, knowing the better choice will depend on the area being painted. High gloss finishes will look plasticky and unnatural on the siding, while satin paint is more understated and inviting. 

Moreover, using a high gloss paint is ideal for fences, doors, and other outdoor details. If you are looking for a more economical paint with a balanced sheen and durability, satin would be the better option. 

Categories
Design & decor

How to paint doors

Many homeowners in Australia want to know how to paint doors properly. If you want to paint your old door and give it a long-lasting finish, there are several simple steps you have to take. It takes the right tools and supplies, proper door preparation and good painting techniques to get quality results. Selecting the right type and colour paint also impacts the way doors look after being repainted. The following tips for painting doors or repainting doors can create doors that make a lasting impression on people entering any room or home.

Materials and tools

  • Ladder or stepstool: Use the ladder or stepstool to reach the top hinge holding the door in place. 
  • Drill/screwdriver: Use the drill or screwdriver to remove the screws holding the door in place, put lag screws into the top and bottom of the door and remove the hinges, doorknobs and other door hardware.
  • Sawhorse: Lay the door flat with the lag screws on each end on the sawhorse.
  • Tarps or sheets of plastic: Use the tarps or sheets of plastic to cover the floor under the area where you will be cleaning, sanding and painting the door.
  • Grease cutter cleanser and some rags: Apply liquid or spray cleanser to the door to remove oil, grease, dirt and stains using the rags. 
  • Sander/sandpaper/chemical stripper: Remove paint buildup on a wooden door with a sharp carbide or stainless steel scraper and smoothen with the sander. Using the best sander for doors is important. On metal doors use sandpaper. Use chemical stripper on doors made of fibreglass to remove flaking paint.
  • Filler: Fill door dents, cracks and holes with spackling compound, two-part filler or epoxy wood filler.
  • Door primer paint: Paint the entire door with door primer paint that’s grey or white primer whether you are painting internal doors or external doors.
  • Paint trays: Pour a little paint at a time into the paint trays. 
  • Paint, high-density foam mini rollers and paintbrushes: Using a paintbrush, edge in around panels and windows. Use mini rollers to paint the entire door. 
  • Painter’s tape: Cover weather stripping with painter’s tape so the door won’t stick when you re-hang an exterior door. 
A fresh coat of paint can make a huge difference to your home’s look / Source: Ozland Painting Group

What type of paint to use on doors

Oil-based paints are ideal to use when painting interior doors. Water-based paints are better for exterior doors and damp areas.

How to prep interior doors for painting

The following are some simple steps for preparing interior doors for painting.

  1. Clear the area and lay down a drop sheet: Remove furnishings from the area where the door will be cleaned and painted and cover it with protective tarps, plastic strips or drop sheets. 
  2. Remove door: Take the door off its hinges and remove the doorknobs, handles, locks, kick plates and other hardware.
  3. Wash the door: Apply spray or liquid cleanser to the door and use rags to clean and wash off the door.
  4. Sand the surface: An electric sander or sandpaper can be used to remove loose paint and smoothen out imperfections in the door’s surface.

How to fill cracks before painting

The first step in filling cracks is to clean the wall thoroughly to remove any debris. Then, use a putty knife to apply a filler such as spackle or joint compound over the crack, making sure to press the filler deep into the crack to ensure maximum coverage. Once the filler is dry, use sandpaper to smooth it down to a flat surface, being careful not to sand too much and cause further damage. Finally, wipe the wall with a damp cloth to remove any excess dust before priming and painting. By properly filling cracks, you can achieve a smooth and flawless finish for your next painting project.

Popular filler brands you can consider are Buidler’s Bog, Elmers, and Minwax.

How to paint a door

Here some simple steps and helpful tips for painting doors. 

  1. Apply a primer if necessary: When painting bare wood or putting a light colour over a much darker one, you should apply a primer. When using self-priming paint or painting over surfaces painted in a similar colour, primer isn’t required. 
  2. Apply an undercoat: When applying an undercoat, use a paintbrush to do the edges of the door. Then use a paint roller for doors in a ‘W’ pattern to cover the door with undercoat evenly. 
  3. Paint edges: Use a paintbrush to paint the door’s edges to seal it and keep moisture out. Apply the same number of coats as on the main surface.
  4. Paint the main surface: When painting the door’s main surface, use a paint roller for doors. Apply the paint using a ‘W’ pattern technique for a neater, more even coverage. Painting doors with a roller is the most efficient way to get the job done.
  5. Leave to dry and apply a second coat if necessary: Leave the painted door to dry for a few hours. If you see imperfections or incomplete or uneven coverage, apply another coat of paint.
  6. Reattach door when completely dry: When repainting doors, to prevent them from sticking, let them dry completely before reattaching them. That takes 6 to 24 hours depending on the paint, temperature and moisture in the air.

Contact local painters

How to paint door frames

When painting door frames, first put down a plastic drop cloth and use 7.6-10.2 cm painter’s tape to line the wall area around the door frame. Clean the frame with grease-cutting cleanser, sand it lightly, fill in any small chips and gouges using wood putty. When painting door frames, the right door paint is important. Use semi-gloss, latex interior paint or exterior trim paint, if the frame opens outside.

Use angled tip handheld brushes for efficiency, precision and to get into tight spaces. Hold the metal band below the bristles for better control over paint placement. Start painting from the frame’s upper inside corner using long, sweeping strokes. When you get to the interior surface’s bottom, repeat the process on the opposite side. Work your way outside the frame and paint the jambs on both sides. To avoid leaving seams, overlap your strokes. Let it dry for 2-6 hours and apply a second coat. 

How to paint a door without removing it

The best way to paint a door without removing it is first to wedge the door and cover the hinges, doorknob and lock with painter’s tape. Clean the door to remove grease, especially near the doorknobs and handles. Use a paintbrush on the top, edge and bottom of the door. Use a foam roller when painting doors with a roller. When you are done painting, carefully remove the painter’s tape. 

Before and after a new paint job / Source: BODEK Painting & Plastering

How to hire a painter

Hiring the right painter is essential. There are three main factors to look out for to ensure you hire the right professional for your job. 

Licencing and qualifications 

Make sure the painter you hire has the proper licencing and qualifications.

Years of experience

It would help if you chose a painter with years of experience painting and who knows lots about door paint and the best way to paint a door. 

Positive reviews and references

Do some research before you hire a painter to do door painting. Choose one that consistently gets good reviews and can provide a list of references for door painting they have done. 

Find out how much a painter will cost to hire in our guide.

Categories
Building & renovations

DIY: How to paint a ceiling

Painting your ceilings is a terrific way to elevate your home’s aesthetic appeal. After all, the ceiling can be considered your fifth wall. Even without repainting all your walls or revamping your furniture, you can dramatically change a space by touching up the ceiling. 

In this guide, we’ll take you through how to paint a ceiling and share a few tricks to make the most of your painting project. It takes a few steps and a few hours on a stepladder, but the results will be worth it.

Tools you’ll need for painting ceilings

Painting an empty kitchen white | Source: iStock

Unsure about what paint roller to use for ceilings and what kind of paint to use? Here are the tools you’ll need to get started with your DIY project:

  • Stepladder
  • Drop sheets, plastic sheeting and painter’s tape
  • Protective gear (e.g., goggles, a dust mask, overalls)
  • Ceiling brush or broom
  • Interior putty
  • Putty knife
  • Sanding pole
  • 22-cm (9-inch) paint roller frames
  • Paint roller covers 
  • Paint roller tray and roller extension pole
  • 5 to 7-cm (2 to 3-inch) angled brushes
  • Stain-blocking primer
  • Your choice of paint

You’ll also need to allot around a day to paint a regular-sized (40 sqm.) ceiling. This includes a couple of hours for prep work, around 30–60 minutes to prime, 30–60 minutes to apply the first coat, and 2–4 hours to wait for this first coat to dry. You can do touch-ups or a second coat as needed. Lastly, you’ll need time to let it set and clean up.

A step-by-step guide to painting your ceilings

Once you have all your tools ready, it’s time to prep and paint! Here’s a beginner-friendly guide on how to paint a ceiling.

Step 1: Preparation

First off, put on your safety goggles, dust mask, and overalls. Get started in removing all the furniture and items in the room, or cover them with drop cloths and plastic sheets. Secure these in place with painter’s tape. If you’re painting an empty room and are doing the walls later on, you can skip this extensive masking.

If you have ceiling fixtures such as lights and ceiling fans, turn the power off, then uninstall or cover all electricals.

Next, sweep or brush the ceiling to clear the dust and cobwebs. You could also use a mop and mild detergent to clean it thoroughly.

Spot any cracks or holes? Apply some interior putty to fill them. Afterwards, sand the whole ceiling down for an even surface.

Step 2: Priming

Prepping the surface before painting | Source: iStock

The best way to paint a ceiling involves priming.

If your ceiling is pretty much stain-free, use any stain-blocking primer. But if there are already splotches, you’ll want to get an oil-based primer for water stains or a shellac-based primer to address other stains.

Use the angled brush to cut into the ceiling. “Cutting into” means outlining the edges and corners of the ceiling. Make 4 to 6 cm-wide strips of primer all around the ceiling. Then, apply primer to the rest of the ceiling. 

Step 3: Cutting into the edges

Check if the primer is dry. Once it’s all good, get another angled brush, your chosen ceiling paint, then cut into the edges, just like you did with the primer. Use a brush to fill the corner with paint, then make a straight line along the edge of the ceiling. You should end up with a nice 4 to 6-cm wide border to fill in at the next step.

Step 4: Painting the rest of your ceiling

Painting the ceiling grey using a paintbrush | Source: iStock

While the edges of your ceiling are still wet, start on the middle portion.

Imagine your ceiling is a grid with many little sections. Pick a section near one corner to start with a wet edge. This helps avoid streakiness and brush marks.

But before you go trigger-happy with your paint, here’s how to properly paint a ceiling with a roller:

  • First, load the paint onto the paint tray. Dip the roller into the deep portion, then run it across the tray several times to spread the paint evenly.
  • Lay the roller on the unpainted portion of the ceiling, then run it towards the wet edge with light pressure. Roll slowly, overlapping each stroke. You’ll also want to change the direction of your rolling–go in rows, columns, and zigzags for an even coat.
  • Once you’re done with one section, move on to the next part, ensuring you roll towards the last wet edge.

Try to finish painting the ceiling in one session to ensure uniform drying and minimise streaks.

Afterwards, wait two to four hours or until the paint is completely dry. Keeping the windows open can help speed up the drying process.

Step 5: Additional coats and touch-ups

This step is optional. But if you’re using a bright colour or flat white, going for another coat can help improve coverage.

The key here is to roll in a direction perpendicular to the first coat to even the paint out.

Once your ceiling is dry and ready for inspection, check the whole area for missed spots. Carefully brush paint onto these spots, then blend them out with a roller. For streaky areas, use the sander to sand these down before reapplying paint.

How to paint the cornices on a ceiling

Carefully painting the cornices | Source: iStock

If the room has cornices or coving, you should use a brush since this will give a more even wash of colour versus a roller.

Begin by cutting in at the edges with a brush and some primer, just as you would with a regular flat ceiling or wall. Apply primer to the rest of the cornice after cutting in. 

Let the primer coat dry completely, then apply the paint. Flat or matte paints are popular, especially since glossy paints can highlight imperfections in the cornice’s designs later on. If needed, use smaller paintbrushes to get into the cornice’s nooks and crannies.

The dos and don’ts of painting ceilings

Now you know the basic steps. But that’s not all there is! These rules for painting ceilings will make the process easier save time and money, and could even help you avoid accidents.

DO’s

  • DO paint the room from the top down, starting with the ceiling and ending with the walls.
  • DO get help when working with electricals on your ceiling, such as when removing or reinstalling your ceiling fan.
  • DO use painter’s tape to mask around the edges for straight lines when you “cut.”
  • DO have rags on hand for drips and splatters.
  • DO choose your ceiling colour wisely. Dark colours look dramatic and make the room feel cosier, but they may make rooms feel smaller. Light colours give the illusion of more space. They’ll also reflect more light.
  • DO choose a flat or matte colour to help hide defects in your ceiling.
  • DO “box” your paint for uniformity. If you’re using multiple cans of the same colour, you should pour them all into one large can or bucket to even out any minor colour differences. 
  • DO maintain a wet edge while painting to hide roller or brush strokes.

DON’Ts

  • Don’t just use any roller cover. Use thin or “low nap” roller covers for smooth ceilings and thicker ones for textured ceilings.
  • DON’T forget safety equipment and precautions. Wear a dust mask and goggles to avoid paint or dust getting into your eyes or inhaling paint fumes. Also, keep the room as ventilated as possible.
  • DON’T attempt to deal with mould in the ceiling by yourself. Ask an expert instead about how to remove mould from the ceiling before painting it.
  • DON’T use too much or too little paint. Excess paint can cause splatters; too little can result in patches and streaks.
  • Don’t attempt to paint a high ceiling by yourself. For your safety, hire a pro instead.

Hiring a professional painter to do the work

Considering hiring a local painter to do your ceilings? This could be a good choice if you’re in a time crunch or simply don’t feel comfortable working so high up for hours.

Make sure your contractor is licensed and qualified. Ideally, they should be insured, too, so you can safeguard against any accidental damage to your property while they’re on the job. You can ask to see the painter’s license, qualifications, and insurance papers before you hire them.

As for painting quotations, you can request a written quote and timetable in advance. This avoids miscommunication and puts you both on the same page. If you’re still canvassing, avoid getting the offer with the lowest quote since this could mean low-quality products and less experience in the industry.

Don’t forget to ask the painter for references or reviews. You can call up these references, read online reviews, and even ask these former customers about the prospective painter’s performance.

Now that you know how to paint a ceiling, get ready to roll!

Painting a ceiling can be an exciting and fulfilling DIY project. Follow this handy guide, and you should be ready to redecorate your home.

But if you think it’ll be a challenge, hiring a pro painter is worth the cost, as they can get the outcome you like. You’ll get the revamped ceiling you’re looking for, plus a perfectly smooth paint job!


FAQs on painting ceilings

How many coats of paint do you need for a ceiling?

Most ceilings only require one coat of paint. But if you’re covering a darker ceiling with a brighter-coloured paint, you may need two to three coats of paint to get the best coverage.

Painting your walls in the same colour as your ceiling? You’ll need a lot more paint since walls typically need two coats, minimum.

How long should you wait to apply the second coat of paint?

You can safely apply a second coat after four hours. Most paint takes two to four hours to dry, but this can change depending on the weather, how well-ventilated your room is, and even the type of paint used.

How do I paint popcorn ceilings with a roller?

When dealing with popcorn ceilings and other textured ceilings, it’s best to use a thick paint roller cover. This holds more paint and distributes it better in the nooks and crannies.

A word of warning when dealing with popcorn ceilings: these may contain asbestos, a dangerous chemical. You may want to hire a professional who can test for asbestos before proceeding with your painting project. 

Categories
Walls & flooring

How to paint a wall

How to prep walls for painting

Fill in surface cracks

Before you look for easy painting ideas, make sure that you know how to prep the walls. You should start with a quick inspection for cracks in the wall. Filling in those cracks with putty and letting it dry overnight ensures that your paint goes on smoothly and that you don’t need multiple coats.

Sand down

If you filled in surface cracks, you need to sand down those cracks before painting. Fine grit sandpaper removes any excess putty and won’t leave behind scratches and gouge marks. You generally want to let the putty dry overnight before sanding it.

Clean walls

As you look for painting tips, you will find that many people recommend cleaning your walls before painting those surfaces. All you need is a little dish soap that you mix with water and apply it to the walls. Cleaning the wall removes any substances that can keep the paint from sticking.

Apply tape a lay a drop sheet

When preparing walls for painting, both painter’s tape and masking tape works well. It goes on smoothly and comes off cleanly without leaving residue behind. Use the tape to block off your outlet and baseboards as well as any other surfaces that you do not want to paint. It’s also a good idea to lay a drop cloth will protect the floors from the paint.

Laying a drop sheet is an important part of preparation / Source: MMPC

Purchase enough paint

Always determine how much paint you need before starting the job, especially if you choose a custom blend. Though home improvement stores follow paint mixture recipes, they cannot guarantee that a new batch will perfectly match your old batch of paint. One litre of paint will cover up to 6.5 square metres. Measure the size of the room and divide it by 6.5 to roughly see how many litres of paint you need.

Required tools

  • Paint/masking tape
  • Drop cloths
  • Primer: Tinted primers match the colour of the paint that you choose and reduce the amount of paint needed. When painting interior walls, you should always use at least one coat of primer first.
  • Brushes: Brushes are helpful for painting areas that you cannot reach with a roller and blending the borders and corners of a room with the rest of the wall.
  • Rollers: To paint a large room in less time, invest in one or more rollers. Rollers are also reusable. Once you finish painting, rinse off the rollers with some clean water and let them sit outside for a few hours to dry. You can use them when you need to repaint or touch up a room later.
  • Tray
  • Ladder: A ladder helps you reach the top of the room and apply both the paint and primer. It also helps you stay safe until the job is done.
  • Clean cloth: Having a few clean and dry cloths nearby can help you take care of accidents as they happen. If you knock over a can of interior wall paint, you can quickly mop it up before it creates a permanent stain. A dry cloth will also help you remove paint that drips onto other surfaces. 

Tips for painting a wall

How to cut in painting

Cutting in painting is a technique that helps the areas around the corners and baseboards blend with the rest of the wall. Whether you use a brush or roller, go over those surfaces with a brush. Use the brush to apply smooth, streaks of paint around the border or corner and pull the brush towards the centre of the room. You can then go over those areas with a roller to smooth out any rough spots.

Contact local painters

How to paint a wall with a roller

Learning how to paint with a roller can save you some time because the roller covers a larger area with paint in less time than it would take with a brush. Pour enough paint in your trap to completely coat the bottom and fill it halfway up the sides. Run the roller through the paint and along the base of the tray. When you pull it towards you, the tray removes any excess paint from the roller. You should then paint a large uppercase “W” in the centre of the wall. As you use more paint, expand the size of the W and move the roller in different directions. This helps you fill in gaps and provides a smooth coat of paint.

How long does it take paint to dry?

The amount of time it takes for the paint to dry depends on the type of paint that you used. It typically takes six to eight hours for most interior house paints to dry. If you use a primer, you need to wait at least an hour for it to dry before applying the paint. You should not remove the tape or move back into the room until you give the paint a full 24 hours to dry. High humidity levels and cold temperatures are two factors that can increase the drying time.

How many coats of paint do you need for a wall?

Most walls need a minimum of two coats. Even if you use a primer, you need two coats of paint. Apply the first and let it dry completely before applying the next coat. If you find that traces of the old paint are still showing, you’ll need to apply a third coat. You may need multiple coats to hide brush marks and other mistakes, too.

Darker paint colours make a great feature wall / Explore Painting

How long does it take to paint a room?

It’s difficult to say how long it takes to paint a room because it depends on the size of the space and how quickly you work. Plan on spending at least four hours to paint a smaller room and up to six hours to paint a larger room. If you use any unique or custom painting techniques, the process will take even longer. 

Tips for painting a feature wall

A feature wall is usually a different colour to the other walls and serves as a focal point in a home. When painting a feature wall, choose colours that work together and use a roller to provide an even coat of paint. You may want to use stencils to add a unique design to the wall, too.

How to hire a painter

Licensing and qualifications

Whether you want to know how to repaint a wall or where to start on your project, consider hiring a pro. Painters in Australia need a Certificate III in Painting and Decorating. They can get this through a registered organisation or a specialty institution. Some also receive their training through an apprenticeship program.