How many DIYers does it take to change a light bulb? One, maybe two with the other one to assist. But when it comes to wiring a light switch, you’ll need to work with a pro to get the job right safely.
Still, it’s good to know what to expect when a licensed electrician comes to wire a light switch in your home. Whether you’re updating your bathroom lighting or switching to a new set of lights, learning the basics of electrical work is essential.
So, how do you wire a light switch? Or rather, how do the professionals do it? Keep reading to learn more.
Australian laws surrounding wiring a light switch
Light switch wiring in Australia and other electrical work requires licences. Your electrician must also give you a certificate proving their work complies with local laws.
Next, you’ll need permission from your local council. While not all electric jobs may need permits, it’s best to check! Resources like Standards Australia and the Housing Industry Association have details on electrical installations and wiring rules. Your state’s WorkSafe site will also have lists of rules specific to your area.
Safety comes first when figuring out how to wire a light switch in Australia. After all, faulty electrical wiring is a fire hazard and may cause electrocution. This precaution is so crucial that in Queensland, you could face up to AUD 600,000 in fines and five years in prison if you do electrical wiring yourself.
Safety precautions when needing lighting and electrical work
Don’t work on switches and wires on your own. When supervising your electrician or tradie, make sure you observe safety measures. These include:
- Turning off the power before you start
- Using protective gear (e.g. rubber gloves)
- Using insulated tools (e.g. a wooden ladder)
- Ensuring access to fire extinguishers and first aid kits
- Never do it yourself; consult a licensed electrician
Tools and materials: What you’ll need
Here’s what a licensed electrician will need to wire a light switch:
- Safety gloves
- Safety glasses
- Pliers
- Utility knife
- Measuring tape
- Screwdriver
- Multimeter voltage tester
- Wooden ladder
- Wire strippers
- Light switch (standard light switch, two-way, or dimmer switch)
Cables and connectors (as needed): You can find the right size and type of Clipsal light switch wiring at hardware stores.
Contact local electricians
How to wire a light switch
Now that the materials are ready, it’s time to begin! Here are the steps you may expect a professional electrician to follow when wiring a light switch in your home.
Step 1: Cut off the power
All electrical work starts with turning off your main power source. This keeps your electrician (and you) safe during the process. Your electrician should have a multimeter to ensure all circuits are switched off. While you’re with an electrician, you could also ask about installing a circuit breaker, if you don’t have one already.
Step 2: Remove the cover and switch
The electrician will then loosen the screws and pull the switch away from the wall. Do note that the light switch will still be attached via its wires.
Step 3: Inspect the wiring
Next, it’s time to inspect the wiring. The electrician will use an electrical tester to identify live wires and check if they are insulated or bare. There are usually three wires attached to a switch: a hot black wire, a neutral white wire, and a ground copper wire.
It’s important to inspect the wiring to see if they are long enough for the new switch. Otherwise, your electrician will need to strip some of the insulation.
Step 4: Disconnect the old wiring
After inspection, the electrician will detach the wires using a screwdriver. If the switch has push-in connections, a little push with a screwdriver can release the wires from the assembly. Once it’s freed, the electrician will discard the old switch.
Step 5: Connect the new wires
Connecting the new wires can get tricky. That’s why it’s good to call in the pros when you need to change a light fitting in Australia.
During this step, the electrician will ensure that the wires are all matched and everything is wired correctly.
Step 6: Install the new light switch
Now it’s time for switch assembly.
Each wire should have 1/2–3/4 inch of wire exposed and bent into a hook. This will wrap around the screws on the switch. If the end of the wire is frayed, the electrician will trim it before wrapping it clockwise around a screw on the switch. They’ll do this on the black wire, then again on the white and copper wires.
Next, the electrician will tighten the screws and check all connections to make sure everything is snug.
The type of light switch can also affect how it is installed:
- For standard light switches, the electrician will use loop-in wiring. They’ll connect a cable to each terminal on the switch, wire it, and then attach the faceplate.
- For two-way light switches, they’ll loop the cables through one terminal and then another before securing it and attaching the faceplate. They’ll likely use diagrams for wiring a two way light switch.
- For dimmer switches, there should be two terminals for the live wires; one labelled “L” and another with a neutral symbol. Both wires will be connected to their terminal points, then wrapped with electrical tape so that no copper is left exposed. Exposed copper will cause short circuits, so your electrician needs to be very careful.
Step 7: Replace the switch plate and do a quality inspection
Once all the wiring is done, the electrician will reattach the switch plate and screw it in. Then, you can turn the power back on and test your new light switch.
Don’t forget to inspect your electrician’s work and ask for the necessary certificates for the wiring.
How to hire an electrician
In Australia, even simply connecting a light switch requires a licensed professional. Thankfully, it’s easy to find a cost-effective electrician near you. It’s convenient, safe, and much better than having to pay a fine.
When hiring an electrician for the first time, you’ll want to consider the following:
- Know your task and budget requirements. Make sure you know whether you need only simple light switch wiring, a dimmer switch, or maybe even help with your switch board?
- Know your certificates and training levels. Check with your local council or building code regarding the certificates needed to wire a light switch.
- Get at least three quotes for the job, but put safety first. Canvassing will help you get a better idea of how your task is priced. Look out for suspiciously low quotes that may be red flags.
- Read reviews and ask for references. It’s good to hire someone trusted by homeowners just like you.
Safety comes first when wiring a light switch
Working with light switches and wires isn’t for DIYers alone. These kinds of projects require licensed electricians. Now that you know the laws, materials, precautions, and processes involved, you’ll better know what to expect when working on your house rewiring project.
Remember: your safety comes first! Don’t risk fire or fines; work with a local electrician instead.
FAQs on how to wire a light switch in Australia
What size wire should I use for a light switch?
Light-load circuits like those in your switches and bulbs usually use 1.5 mm2 wire. Still, it’s best to check with an expert if you plan to purchase the wire yourself.
What is a common terminal for wiring light switches?
The common terminal is where the live wire is attached. It usually comes in black, but it may be brown in newer homes or red in older homes. A licensed electrician will know the right colours for terminals and wires when wiring a light switch in your home.
Does it matter which wire goes on a switch?
Wire colours can be confusing! But when connecting a single pole light switch, it doesn’t always matter which wire goes into what terminal on a switch. This is because switch terminals are interchangeable; however, it’s vital for complex switches to follow the specific placement. Still, it’s best and often legally required to call in a pro electrician to work on your light switch and its wires.
Can I change light fittings myself in Australia?
No, you can’t. In Australia, light switch fitting and wiring must be done by a licensed electrician, with permission from your local council. Doing electrical work without a licence will result in a fine and time in prison since faulty electrical work poses serious risks to lives and property. So, while you can pick out a new light fixture and switch from halogen to LED lamps, you should leave the actual electrical work to the pros.