Categories
Roofing

How to install guttering

Gutters channel the water away from your home so that it does not cause damage to your foundation or walls. If your gutters are clogged or need to be replaced, they can end up costing you more in repairs in the long run. You might think that repairing or replacing your guttering yourself is a good option, but this is one project where you can get into more than you imagined, so it might be a good idea to hire a professional. If you decide to do it yourself, here is what you can expect. 

How do you know if your gutters need repairing or replacing?

One of the biggest things that you might be wondering is if you need guttering replacement or whether someone can repair it. The first thing you need to do is determine if your gutters are clogged and require cleaning out. Whether they need to be repaired or replaced, cleaning them is the first step. If you clean your guttering and you find that you still have water leaking from them in a few places, then you might be able to repair it with silicone sealant. If your guttering is corroded, hanging loose, or pulling away from the roof, then it might be time for a replacement. 

The guttering price depends on the type of guttering that you choose and how much you need. Continuous guttering is a popular choice because it comes in various shapes and has a seamless look. If you select this type of guttering, it is also more challenging to install correctly. The average cost for guttering is between $30 to $160 per metre. PVC is the least expensive, with stainless steel being the most costly type. 

Can I install gutters myself?

It is technically possible to install guttering yourself, but you must be licenced to carry out this work in many parts of Australia. Any guttering work that involves drainage work might require a plumber’s licence. Replacing gutters in many parts of Australia is considered a licenced trade. Once the job has been complete, you will often need a compliance certificate for your home records. This means that you are not allowed to do the job yourself, and we do not recommend it. The information in this article is for information only. 

Source: Ultimate Gutter Cleaning

Materials and tools

If you decide to install your gutters despite local regulations, here are a few things that you will need. 

Materials:

  • Guttering material
  • Gutter flashing
  • Hanging straps
  • Elbows
  • Downspouts
  • Rivets
  • Hex head screws
  • Self-tapping hex head screws
  • Sealant approved for outdoor use

Tools:

  • Cordless drill
  • Crimping tool
  • Duckbill tin snips
  • Hex head driver
  • Offset tin snips
  • Pop rivet gun
  • Spirit level 
  • Pencil
  • Appropriate ladder

How to install gutters

Now that you know what you need, it is time to discuss the process. The exact procedure depends on the style of your home. Here are the general steps of the process. 

  • Plans and sketches: The first thing you need to do is draw a sketch of your house and note how much guttering you need. You will also need to know how many things like elbows, hangars, and downspouts. You will need to make a detailed plan of your guttering system. 
  • Remove the old guttering: The first step is to remove the old guttering. You must remove it carefully so that you do not damage the roof or walls beneath.
  • Measure and cut the pieces: It is easier to measure and assemble the guttering on the ground and then install it. You will need to measure the pieces and assemble them on a large work surface. You must know how to notch the guttering properly to join pieces. It is difficult to fix any mistakes that are made in this phase. An accurate measurement can mean having to purchase more guttering and starting over. 
  • Assemble the pieces: Now it is time to assemble the pieces. Most pieces snap together. Use rivets to attach the sections together permanently. You must apply a sealant to the seams to make them watertight.
  • Cut the downspout holes: Next, measure and cut the holes for the downspouts. This must be carried out with precision, or they will not fit properly. Rivet the downspout outlet to the gutters. 
  • Set the slope: Now, use a spirit level to mark the proper slope all around the fascia of the house. 
  • Mount the guttering: Screw the gutter to the fascia, add the gutter flashing, and attach the hangers. Attach the downspout brackets to the house, and assemble the downspout elbows. Rivet the downspouts to the brackets. 

Contact local guttering experts

How to install gutter guards

Gutter guards are an excellent way to keep gutters from becoming clogged with leaves and debris. You must carefully lift the edge of the roofing up with a putty knife so that the gutter guard can be placed underneath it and snapped to the edge of the gutter on the side opposite the house. You will have to mitre the corners and make proper joins. Some guards are fastened to the fascia with screw brackets. 

How to hire a gutter installer

As you can see, there is more to installing guttering than it would seem at first. Even if you were allowed to do it yourself, there are many reasons why you would not want to attempt it, especially being up on a ladder for that amount of time when you are not used to it. Here are a few questions you should ask when hiring a guttering installer. 

  • Are you licenced to install guttering in this state? 
  • What is your experience with the type of home that I have? 
  • What is included in the installation, such as regular cleaning or a similar offer?
Categories
Lighting & electrical

How to install a ceiling fan

A ceiling fan is an excellent addition to any room of the home. Even if you have an AC, a ceiling fan can help it work more efficiently by circulating the air. Ceiling fans range in price from $89 to $350 or more. Then, you have an additional ceiling fan installation cost of between $200-$300. This might have you asking the question if you can install it yourself.

Can I install a ceiling fan myself?

The technical answer to this question is yes, but you cannot do so in Australia. The main reasons why DIY ceiling fan installation is illegal in Australia are two-fold. The first is that it involves electricity, and there is a risk of fire hazard or electrocution if you do not do everything right. The second is that if the ceiling fan is not mounted correctly, it can fall or damage the ceiling. These are the best reasons to hire a trusted professional instead of doing it yourself. 

Where to hang a ceiling fan

The most common place to hang a ceiling fan is in the centre of the room, but this is not always the case. You might want a ceiling fan in a specific location, like over the bed or in one half of an entertainment room. The ceiling fan placement must also take into consideration the location of any wires or pipes above the ceiling. It must also be mounted securely to the ceiling beams.

Source: Local Architect South Coast

Materials and tools

Here are some of the tools and materials that your ceiling fan professional will bring with them to do the job. 

  • Fan with mounting kit
  • Fan support brace
  • Wall control switch
  • Hammer
  • Nails
  • Drywall saw
  • A multimeter or circuit tester
  • Wire strippers
  • Screwdrivers
  • Drill or driver

Contact local experts

How to install a ceiling fan 

Here are the basic steps to installing a ceiling fan that your professional will have to do. These steps are not complete instructions and are for information only. 

  • Turn off the power: The first thing to be done is to turn off the power at the circuit panel. Your professional will double-check with the circuit tester to make sure no power is flowing in the wires. 
  • Remove the old fan: Unscrew the lightbulb cover and remove the bulbs. Lower the fixture and loosen the electrical tape and wire nuts. Disconnect the wires and remove the existing ceiling box. 
  • Install the hanging bar: The adjustable hanging bar and electrical box will be screwed to the beams and fastened according to the manufacturer’s instructions. This is the most important part of the installation to ensure the fan does not wobble and damage the ceiling. 
  • Assembly and hanging: Assemble the fan according to the instructions and attach the fan assembly to the ceiling electrical box. Connect the wires, making sure to follow all local and state guidelines regarding the amount of exposed end, types of wire nuts, lack of kinks, and other considerations. 
  • Attach blades and trim: Assemble and attach the blades and trim. Now it is time to turn on the power and test the fan. 

Safety precautions to take when installing a ceiling fan yourself

Installing a ceiling fan involves several safety hazards. The first is that it involves electricity. If you do not know how to connect the wires properly, it can cause a fire. There is also the potential for an electrical shock. Also, you will be on a ladder working with your hands overhead. If you are not used to it, you can easily fall. Not only are you working on a ladder, but you are lifting heavy objects and working at odd angles. That is another reason why hiring a professional who is knowledgeable and used to the working conditions is a good idea. 

Source: KTR Creations

How to hire an electrician

If you want to have a new ceiling fan installed, you must have the work performed by a licenced electrician. In some states, you can face heavy fines and even prison time for connecting a fan to the wires of your home. Here are some things you should ask when hiring an electrician to install your fan. 

  • Are you licenced to work in my location? 
  • Can you provide proper certificates after the installation?
  • Are you insured, and do you offer a warranty on your work?
Categories
Lighting & electrical

How to wire a light switch

How many DIYers does it take to change a light bulb? One, maybe two with the other one to assist. But when it comes to wiring a light switch, you’ll need to work with a pro to get the job right safely.

Still, it’s good to know what to expect when a licensed electrician comes to wire a light switch in your home. Whether you’re updating your bathroom lighting or switching to a new set of lights, learning the basics of electrical work is essential.

So, how do you wire a light switch? Or rather, how do the professionals do it? Keep reading to learn more.

Australian laws surrounding wiring a light switch 

Light switch wiring in Australia and other electrical work requires licences. Your electrician must also give you a certificate proving their work complies with local laws.

Next, you’ll need permission from your local council. While not all electric jobs may need permits, it’s best to check! Resources like Standards Australia and the Housing Industry Association have details on electrical installations and wiring rules. Your state’s WorkSafe site will also have lists of rules specific to your area.

Safety comes first when figuring out how to wire a light switch in Australia. After all, faulty electrical wiring is a fire hazard and may cause electrocution. This precaution is so crucial that in Queensland, you could face up to AUD 600,000 in fines and five years in prison if you do electrical wiring yourself. 

Leave the task to the experts | Source: Shutterstock

Safety precautions when needing lighting and electrical work

Don’t work on switches and wires on your own. When supervising your electrician or tradie, make sure you observe safety measures. These include:

  • Turning off the power before you start
  • Using protective gear (e.g. rubber gloves)
  • Using insulated tools (e.g. a wooden ladder)
  • Ensuring access to fire extinguishers and first aid kits
  • Never do it yourself; consult a licensed electrician

Tools and materials: What you’ll need

Here’s what a licensed electrician will need to wire a light switch:

  • Safety gloves
  • Safety glasses
  • Pliers
  • Utility knife
  • Measuring tape
  • Screwdriver
  • Multimeter voltage tester
  • Wooden ladder
  • Wire strippers
  • Light switch (standard light switch, two-way, or dimmer switch)

Cables and connectors (as needed): You can find the right size and type of Clipsal light switch wiring at hardware stores.

Contact local electricians

How to wire a light switch 

Now that the materials are ready, it’s time to begin! Here are the steps you may expect a professional electrician to follow when wiring a light switch in your home.

a woman turning off the lights
It’s important to switch off the lights before getting to work for safety | Source: iStock

Step 1: Cut off the power

All electrical work starts with turning off your main power source. This keeps your electrician (and you) safe during the process. Your electrician should have a multimeter to ensure all circuits are switched off. While you’re with an electrician, you could also ask about installing a circuit breaker, if you don’t have one already.

Step 2: Remove the cover and switch

The electrician will then loosen the screws and pull the switch away from the wall. Do note that the light switch will still be attached via its wires.

Step 3: Inspect the wiring

Next, it’s time to inspect the wiring. The electrician will use an electrical tester to identify live wires and check if they are insulated or bare. There are usually three wires attached to a switch: a hot black wire, a neutral white wire, and a ground copper wire.

It’s important to inspect the wiring to see if they are long enough for the new switch. Otherwise, your electrician will need to strip some of the insulation.

Step 4: Disconnect the old wiring

After inspection, the electrician will detach the wires using a screwdriver. If the switch has push-in connections, a little push with a screwdriver can release the wires from the assembly. Once it’s freed, the electrician will discard the old switch.

Step 5: Connect the new wires

Connecting the new wires can get tricky. That’s why it’s good to call in the pros when you need to change a light fitting in Australia.

During this step, the electrician will ensure that the wires are all matched and everything is wired correctly.

Step 6: Install the new light switch

Now it’s time for switch assembly.

Each wire should have 1/2–3/4 inch of wire exposed and bent into a hook. This will wrap around the screws on the switch. If the end of the wire is frayed, the electrician will trim it before wrapping it clockwise around a screw on the switch. They’ll do this on the black wire, then again on the white and copper wires.

Next, the electrician will tighten the screws and check all connections to make sure everything is snug.

The type of light switch can also affect how it is installed:

  • For standard light switches, the electrician will use loop-in wiring. They’ll connect a cable to each terminal on the switch, wire it, and then attach the faceplate.
  • For two-way light switches, they’ll loop the cables through one terminal and then another before securing it and attaching the faceplate. They’ll likely use diagrams for wiring a two way light switch.
  • For dimmer switches, there should be two terminals for the live wires; one labelled “L” and another with a neutral symbol. Both wires will be connected to their terminal points, then wrapped with electrical tape so that no copper is left exposed. Exposed copper will cause short circuits, so your electrician needs to be very careful.

Step 7: Replace the switch plate and do a quality inspection

Once all the wiring is done, the electrician will reattach the switch plate and screw it in. Then, you can turn the power back on and test your new light switch.

Don’t forget to inspect your electrician’s work and ask for the necessary certificates for the wiring.

How to hire an electrician

a female electrician screwing a light switch
Know when to call a pro for assistance | Source: iStock

In Australia, even simply connecting a light switch requires a licensed professional. Thankfully, it’s easy to find a cost-effective electrician near you. It’s convenient, safe, and much better than having to pay a fine.

When hiring an electrician for the first time, you’ll want to consider the following:

  • Know your task and budget requirements. Make sure you know whether you need only simple light switch wiring, a dimmer switch, or maybe even help with your switch board?
  • Know your certificates and training levels. Check with your local council or building code regarding the certificates needed to wire a light switch.
  • Get at least three quotes for the job, but put safety first. Canvassing will help you get a better idea of how your task is priced. Look out for suspiciously low quotes that may be red flags.
  • Read reviews and ask for references. It’s good to hire someone trusted by homeowners just like you.

Safety comes first when wiring a light switch

Working with light switches and wires isn’t for DIYers alone. These kinds of projects require licensed electricians. Now that you know the laws, materials, precautions, and processes involved, you’ll better know what to expect when working on your house rewiring project.

Remember: your safety comes first! Don’t risk fire or fines; work with a local electrician instead. 


FAQs on how to wire a light switch in Australia

What size wire should I use for a light switch?

Light-load circuits like those in your switches and bulbs usually use 1.5 mm2 wire. Still, it’s best to check with an expert if you plan to purchase the wire yourself. 

What is a common terminal for wiring light switches?

The common terminal is where the live wire is attached. It usually comes in black, but it may be brown in newer homes or red in older homes. A licensed electrician will know the right colours for terminals and wires when wiring a light switch in your home.

Does it matter which wire goes on a switch?

Wire colours can be confusing! But when connecting a single pole light switch, it doesn’t always matter which wire goes into what terminal on a switch. This is because switch terminals are interchangeable; however, it’s vital for complex switches to follow the specific placement. Still, it’s best and often legally required to call in a pro electrician to work on your light switch and its wires.

Can I change light fittings myself in Australia?

No, you can’t. In Australia, light switch fitting and wiring must be done by a licensed electrician, with permission from your local council. Doing electrical work without a licence will result in a fine and time in prison since faulty electrical work poses serious risks to lives and property. So, while you can pick out a new light fixture and switch from halogen to LED lamps, you should leave the actual electrical work to the pros. 

Categories
Bathroom & laundry

How to clean a washing machine

If your washing machine is not working like it used to, the problem could be as simple as needing a good cleaning. If you find stains, patches of colour or your clothing look dingy; it might be your washing machine telling you it needs some attention. Cleaning your washing machine is easy, and it can save you a repair call. 

How often should you clean a washing machine?

The answer to this question depends on how much you use it. The dirt and grime in your clothing have to go somewhere, and it can get caught in the filters, inlets and outlets, and pipes. Soap scrub builds up and can act as a trap for dirt. Cleaning your washer every six months will keep your clothing and your machine fresh and clean. 

Some signs that your washing machine is in desperate need of a deep clean is a musty smell in your supposedly clean clothing. If your machine smells like dirty socks, then you need to clean it. If the inlets and outlets are clogged, it can interfere with the machine’s functioning by blocking water flow. This can lead to more costly repairs later. If this happens, one of the key signs is that soap might not be rinsed all the way out. 

Source: Alice Bonicelli Interior Design

Materials and tools

Here are the tools that you will need:

  • Spray bottle
  • Microfiber cloth or sponge
  • Old toothbrush
  • Bottlebrush

When it comes to what to use to clean a washing machine, you have several options. You can buy a washing machine cleaner that is formulated specifically for this purpose. Many people choose to use more natural products, such as vinegar and baking soda. The best washing machine cleaner is one that removes the soap film. When you clean a washing machine with vinegar, you need to make sure to rinse it well so that your clothing does not smell like vinegar. 

How to clean a washing machine

Before we get into the cleaning process, you need to check to see if your washing machine has a self-clean cycle. You can use that if it has one, but if it does not, you can do the washing machine cleaning using this simple process. 

  1. Run a hot cycle. The first thing to do is run a regular cycle on hot, adding 60 mL of distilled white vinegar or cleaner instead of laundry soap. Add it to the detergent dispenser. This will not harm your machine, but it will prevent bacteria and mildew. 
  2. Scrub the inside. Add vinegar or cleaner to the spray bottle and spray the inside of the drum. Use the old toothbrush and sponge to scrub the drum. The old toothbrush can be used to clean the cracks, crevices, and gaskets. 
  3. Run one more empty load. Now, add another 60 mL of vinegar to the dispenser or sprinkle some baking soda directly in the drum. Run another cycle of hot water. 
  4. Check the inlets. Check the inlets and outlets for build-up. Spray them with some vinegar or cleaner. You might try using a bottle brush to clean as much as you can. 
  5. Wipe the outside. Spray the outside of the machine and the inside of the door. Wipe it down with the sponge. Use the toothbrush to clean around the hinges. 
  6. Clean the filter. Take out the filter, run it under hot water and gently clean it with the toothbrush. Be careful not to damage it. Replace it into the machine. 
  7. Dry the drum. Use the microfiber cloth to dry the drum or leave the door open to allow it to air dry. 

Contact local plumbers

Front loader vs. top loader

Cleaning a front loader and cleaning a top loader is slightly different. The above instructions are for a top loader. When cleaning a front-loading washing machine, it is a good idea to consult the manual for instructions before proceeding. You can start by running a cycle with a cleaner or vinegar as you did in the previous section’s steps. 

Dirty filters are a common contributing factor to a front-loading washer that is not cleaning properly. Also, remove and clean the soap dispensers and fabric softener dispensers with hot, soapy water. Rinse them with vinegar or allow them to dry in the sun to help prevent mould. 

How to avoid getting a scrub build-up

The best way to clean a washing machine is to take measures to prevent it from getting dirty in the first place. Eventually, you will need to clean it, but you can lengthen the time between washing machine cleanings by taking a few steps. 

  • Use less detergent in your loads
  • Avoid overloading your washing machine to allow water to drain freely
  • Use liquid detergent or dissolve the powder in water before running a cold water load
  • Store detergent in an airtight container and break up any clumps before adding the powder to the load
  • Occasionally run an empty load with just detergent and hot water
Source: Gleeson Tiling and Bathrooms

How to hire a plumber

Hopefully, your washing machine will be working correctly after a good cleaning, but if it is not, then it might be time to call a licenced plumber. You might discover that there is another problem as you are cleaning the machine. If you need to call a plumber, make sure that you hire someone who has the proper qualifications. 

Licencing and qualifications

Each state has its own licencing and qualifications for plumbers. They must also hold a national certificate in plumbing. Plumbers must complete an apprenticeship program, and they may receive advanced training. Ask about your plumber’s qualifications to work on your washing machine before you hire them.

Categories
Outdoor living

A DIY guide on how to get rid of a wasp nest

Wasps are a common sight in Australian homes and gardens. They can be aggressive and their stings are painful, so it’s important to know how to get rid of a wasp nest safely.

Wasps are known to build nests in a variety of locations, including under eaves, on tree branches, tree trunks, and even inside your home. If there’s a wasp nest on your property, identify if it’s really a wasp or bee hive, and then take action to remove them. If you’re wondering what to do with wasp nests, this article will guide you.

How to identify and deal with a wasp nest

There are over 10,000 wasp species in Australia. These include European wasps introduced to Australia, and thus, have no predators to keep their population in check.

You can find these insects in a variety of habitats, including forests, woodlands, and urban areas. One such wasp, the paper wasp, can even find their way inside your home and nest there. Some European wasp nests can also be found in Australian homes.

While some people are comfortable removing wasp nests themselves, it’s generally recommended to contact a pest control company for assistance. They have the experience and equipment for easy and safe wasp nest removal and to prevent future infestations.

Wasps can be dangerous to people | Source: Shutterstock

Signs you have a wasp problem in your property

wasp nest under the roof
Check under your roof for nests | Source: iStock

Wasps can become a nuisance if there is a significant increase in their activity around your property.

Signs of increased wasp activity include:

  • Wasps congregating around soft drink cans, rubbish bins, and compost heaps
  • You or your children being stung by wasps more frequently

Accidental contact with these hidden nests can trigger a swarm of aggressive wasps to attack and inflict multiple stings.

If you are experiencing these signs, it is important to take action to identify and remove any wasp nests before the situation escalates further.

Safety precautions and tools you’ll need to remove wasp nests

Before you get rid of wasp nests, safety should be your top priority. Always wear protective gear, such as a long-sleeved shirt and long pants, gloves, and a hat, and avoid working near nests during peak activity hours (usually midday to late afternoon).

  • Protective equipment and clothing
  • An empty spray bottle
  • Heavy-duty garbage bag for wasp nest disposal
  • Headlamp or torch
  • Long-handled brush or broom
  • Ladder (if the nest is located high up)
  • A can of wasp spray
  • Other household materials

Using these tools and materials enables you to create many different methods to remove wasp nests yourself for a small wasp nest removal cost. Remember, if you’re unsure about removing a wasp nest yourself, it’s best to call in a professional pest control company.

Contact local pest control experts

How to get rid of a wasp nest

Once you’ve taken the necessary safety precautions, it’s time to tackle the wasp nest. Here are some common methods for removing wasp nests.

Look in the corners where they could be hiding | Source: Shutterstock

Method 2: Try natural repellents

Certain natural substances can deter wasps from nesting. Essential oils like peppermint and lemongrass can be mixed with water and sprayed around the nest. Bonus: peppermint also works on other insects, such as termites. You may need this repeatedly to achieve results.

Method 3: Chop up chilli peppers

Boil 2 cups of chopped chilli peppers in 2 cups of water for 2 minutes and let it cool. Afterwards, put it in a spray bottle and spray the nest and the wasps with it.

Method 4: Mix a dishwashing liquid solution

cleaning supplies flat lay
The solution could be found in your kitchen | Source: iStock

Mix dishwashing liquid with water (about two parts water to one part of dishwashing liquid) and spray it directly onto the wasp nest. The soapy solution will clog the wasps’ breathing holes, suffocating them.

Method 5: Block the entrance

Seal the entrance to the wasp nest with caulk, sealant, or even duct tape. This will prevent wasps from entering and exiting the nest, eventually suffocating them.

Method 6: Use a vacuum cleaner

Use a vacuum cleaner with a long hose attachment to suck up the wasps and the nest. This method is quick and effective, but it’s important to use a vacuum cleaner with strong suction power.

Method 7: Deploy a wasp trap

a plastic bottle being used as trap for wasps
Get resourceful when making wasp traps | Source: iStock

Identify the location of the nest and set up a wasp trap near the entrance. Traps typically contain a sweet liquid that attracts wasps, which then get trapped inside. That said, wasp traps are great for reducing the wasp population but may not always eliminate the entire wasp nest.

Method 8: Prepare a boric acid solution

Mix 1 to 3 teaspoons of pure boric acid powder with half a gallon of sweet liquid like fruit juice or sugar water. The wasps are attracted to the sweet bait, and you can place it in areas where wasps frequent, similar to the wasp traps above. Not only will the wasps that ingest the solution get poisoned, but they will also bring the rest of the poison to the entire colony. Wait for about two weeks to see the results.

Method 9: Sprinkle baby powder

Dust baby powder on the nest and other areas where wasps are frequent. The talc in it drives wasps away. One reason is that the fine dust that talc consists of can clog wasps’ respiratory systems, which can be found in their exoskeleton, like many other insects. This makes baby powder also effective for other pests like ants and spiders.

Method 10: Use vinegar

white spray bottles
Get spray bottles for your vinegar solution | Source: iStock

Using a mixture of equal parts white vinegar and water around doors, windows and potential nesting sites can help keep wasps away, as they dislike the strong acetic smell. However, spraying directly on wasps or nests will only anger them without killing them.

Method 11: Try cucumber

To get rid of wasps, slice cucumbers and place the slices on aluminium foil or in an aluminium container. This creates a chemical reaction that produces a faint scent undetectable to humans but highly repulsive to wasps.

When to call for professional pest control

How do you get rid of a wasp nest? The easiest answer is usually by calling a professional exterminator.

While DIY methods can work for smaller, easily accessible nests, there are times when it’s best to call in the professionals. If you’re dealing with a large nest, a nest located in a hard-to-reach area (like high up in a tree, under the eaves, or general European wasp removal), or if you’re simply not comfortable tackling the job yourself, a professional pest control company is the way to go.

If you’re wondering who to call to get rid of wasp nests, keep the following in mind:

  • Look for companies that are licensed and insured
  • Read online reviews from other customers
  • Ask for a quote and discuss the specific details of your wasp problem with the pros.

In any case, hiring a professional is the safest and most effective method, especially for large or difficult-to-reach nests.

How to prevent wasps

To keep wasps away, don’t have thick shrubs near your home. Empty and wash rubbish bins regularly. Clean and properly maintain your gutters. Wasps sometimes build large nests in or under gutters. Put screens on windows and doors and seal all cracks to stop wasps from entering your home. Put wasp traps in your garden. Keep sweet-smelling plants far from your house. If you see wasps flying near your home, it is a good indication that they have a nest nearby. 

How to deal with wasp stings

A wasp sting can be painful, but knowing how to handle it can help. Carefully scrape out the stinger if it’s still embedded, then wash the area with soap and water. Apply a cold compress for 10–15 minutes to reduce swelling and pain. Take an over-the-counter pain reliever like paracetamol or ibuprofen.

If you experience difficulty breathing, swelling of the face or throat, dizziness, or nausea, seek immediate medical attention, as this could be a sign of a severe allergic reaction. If the sting site becomes red, swollen, or painful, or you experience any unusual symptoms, consult a doctor or pharmacist.

Make your home a wasp-free zone

Dealing with wasp nests can be a real pain, but with the right knowledge and precautions, you can successfully tackle those pesky insects. By addressing the problem promptly and safely, you can reclaim your space and enjoy a peaceful summer without the threat of stings.

And if you’re ever unsure about tackling a wasp nest yourself, remember—there’s no shame in calling in the pest control experts. They’ve got the gear, the know-how, and the experience to get rid of those buzzing bludgers for good.


FAQs on getting rid of wasp nests

How can I get rid of wasp nests in Australia without killing them?

While it’s difficult to relocate wasps without harming them, you can try using natural repellents like peppermint oil or vinegar solutions. These may deter wasps from nesting, but they won’t eliminate existing nests.

The best way to avoid dealing with wasps is to prevent them from nesting in the first place. This can be done by sealing up any cracks or holes in your home, keeping food and drink covered, and removing potential nesting sites like old wood piles or piles of leaves.

If all else fails, you can relocate the wasp nest. This is a more challenging option, as it requires carefully removing the nest and relocating it to a more suitable location, often far away from your property. This is best left to professionals with experience in handling wasps.

Will wasps return to a sprayed nest?

If the nest isn’t completely destroyed, wasps may return and rebuild. Ensure you’re using a wasp-specific insecticide and thoroughly spray the entire nest, including the entrance and any visible wasps. For best results, remove the nest after spraying and dispose of it properly.

How much does it cost to remove wasp nests in Australia?

The cost of a removal of a wasp nest service varies on the nest size and location as well as the pest control company you choose. You can expect to pay between $100 and $550 for a wasp nest removal. For more specific pricing, contact local pest control companies in your area.